2021 ZKTeco 125-ID 13.56-IC 4 Doors 4 Reader Multifunction Access Control TCP/IP

Description

Note:only have English Manual.and the DC3V battery CR2032 is not include,because post office can't it,it will easy to buy.
This MainBoard Support 125KHz EM4100 Reader,125KHz HID Reader,13.56 IC Reader,Wiegand26 Format.And Few fingerprint Controller.
Introduction:
ZK Access Systems are built on flexible, open technology to provide management, real-time monitoring , and control of your access control system—all from a software, Our secure software infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location. C3
-400’
s versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable controllers on the market, with a multitude of built-in features. The C3-400 can communicate at 38.4 Kbps via RS-485 configuration or Ethernet TCP/IP networks. It can store up to 30,000 cardholders.
Features:
Multiple hardware protection measure
There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal.
Integration with Other Security Systems
C3-400 can be integrated with other security systems such as CCTV, fire alarm, BAS(building automation system) and other systems to configure total security system.
Supports different wiegand reader
The controller support different wiegand format, and can connect to different reader, including ID card reader and Mifare card reader
Input/Output Ports to Control Doors
Connect with variety of sensors, alarms, exit buttons, electric lock and other devices.
Variety of Communication Function
Using either serial or TCP/IP communication, it provides reliable network system
B/S structure software
It is easy to manage the system by browser from client PC. There is no need to install software on each client.
Normal open after first punch card can be setup
Real-time Monitoring of Door status
Using the management software, it allows real-time monitoring and control of door opening and closing of the whole system.
Simple Access Control System Configuration
Interlock function
Link different doors with special logic that one door is Open, others should be closed.
Multi-card operation
This function is used to manage visitors or to manage some special high secure place. The doors are opened when appointed number registered cards are read together.
Anti-Passback
Duress Mode
Specifications:
Model C3-400
CPU 32bit MIPS CPU
RAM
32M
bits
Flash Memory
256M
bits
Number of door controller: 4 door
Number of readers supported: 4
Number of inputs: 8(4- exit device and 4-door status)
Number of output:8(4-Form C reply for lock and 4-Form C reply for Aux output)
User 30,000
Event Buffer 100,000
Power / Current DC 9.6V-14.4V, Rated Max
.1A
Reader
Port
2ea (26bit Wiegand, 8bit Burst for PIN)
Communication RS485, TCP/IP
Baud Rate 38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)
Input
Port
2ea (Exit Button#1, Door Sensor#1)
Output Port1ea (1 FORM-C Relay Output, SPDT
5A
@36VDC/
8A
@30VAC) 1ea (1 Aux FORM-C Relay Output, SPDT
2A
@30VDC)
LED Indicator Yes, LED indication for communication, power, status and punch card
Operating Temperature 0°to +
55°C
Operating Humidity 10% to 80% relative humidity non-condensing
Dimension (L*W)mm 160(W)*106(H)(single board ) 345(W)*275(H)*70(D)(with power supply and metal box)
Certification CE, FCC
Package Included:
1 x 4 door controller(power supply,lock,reader not include)
1 x English Manual and software CD