3M Die Grinder 28629 Pneumatic Power 0.3 HP Motor 1/4" Collet 25000 RPM USA

Description

3M Die Grinder 28629 Pneumatic Power 0.3 HP Motor 1/4" Collet 25000 RPM USA
Home
View all listings
About
Contact
Terms
Sawblades
Sockets
Wrenches
Hand Tools
Router Bits
Drill Bits
Tape Measures
Knifes
Hardware
Menu
Categories
Air Tools
Armstrong Tools
Automotive
Bath Hardware
Buffing & Polishing
Bungee Cords & Tie Downs
Chisels & Punches
Chucks & Keys
Clamps & Vises
DeWalt
Door Hardware
Drill Bits
Electrical
Extension Cords
Files
Flashlights
Hammers
Hand Tools
Hole Saws
Insert Bits
Irwin
Jig Saw Blades
Knives & Blades
Lighting
Locks
Measuring Tools
Paint Supplies
Pliers
Power Tools
Reciprocating Blades
Router Bits
Safety
Sandpaper
Saw Blades, Grinding Wheels
Scissors & Crafts
Screwdrivers & Nutdrivers
Sockets
Taps & Dies
Tool Storage
Torches
Torx & Hex Keys
Welding & Soldering Wrenches
Other
3M Die Grinder 28629 Pneumatic Power 0.3 HP Motor 1/4" Collet 25000 RPM USA
Click Thumbnails to Enlarge
Product description
3M Die Grinder 28629 Pneumatic Power 0.3 HP Motor 1/4" Collet 25000 RPM USA
Product Features Straight shaft tool with narrow collet allows access to hard-to-reach spaces with products such as cartridge rolls and cross buffs Precision-balanced steel motor reduces vibration for greater efficiency and operator comfort 3M Gripping Material on the body reduces vibration and enables operator to maintain a secure grip with less effort Directional exhaust suits operator preference This 3M(TM) straight shaft, tool has been extended 3-inches allow operator to get into hard to reach areas. Lightweight 0.3 horsepower pneumatic die grinder is designed to efficiently perform a variety of polishing, buffing, shaping, and deburring functions. Powerful and light-weight tool. Off-set gear box for increased torque. Gripping material for greater operator comfort. Safety lever throttle to avoid accidental starting. Ideal for medium-duty applications. 1/4-inches air inlet thread size. This 0.3 horsepower, 25000 RPM die grinder has rear exhaust, comes standard with 1/4-inches collet size, as well as a 1/8-inches collet insert, a 1/4-inches to 1/8-inches reduction bushing, and 2 wrenches. The 3M™ Die Grinder 28629 is a straight shaft tool ideal for accessing hard-to-reach areas for medium-duty applications such as deburring, shaping, buffing, and polishing. This pneumatic tool has an efficient 0.3 hp motor and is designed for continuous use with features that enhance operator comfort and control. The precision-balanced steel motor reduces vibration and creates a lighter weight tool, while 3M™ Gripping Material on the body further reduces vibration and enables a secure grip with less effort. The adjustable directional exhaust allows airflow to be directed in any direction preferred, even toward the operator for cooling if desired. The 3M Die Grinder 28629 comes with an off-set gear box for increased torque, a standard 1/4" collet as well as a 1/8" collet insert, and a 1/4" to 1/8" reduction bushing. To prevent accidental starting, the grinder incorporates a safety lever. Length is 6" and Max RPM is 25,000 at 90 psi. Use with accessories that have a max RPM of 25,000 or greater. A die grinder is a handheld power tool that runs spindle-mounted abrasives such as coated abrasives or nonwoven surface conditioning abrasives. Typical coated abrasive products that can be run on a die grinder include cartridge rolls for reaching tight corners and crevices, cross pads for sanding small internal diameters, and evenrun bands and flap wheels for sanding and polishing contours. Scotch-Brite™ surface conditioning products typically used include radial bristle discs, combi wheels, and cross buffs for removing rust and debris from internal diameters of small cylinders. These are just a few of a multitude of products that can be run on a die grinder. The Die Grinder 28629 requires a clean lubricated air supply that will give a measured air pressure at the tool of 6.2 bar (90 psi) when the tool is running with the lever fully depressed so the maximum RPM is not exceeded. The tool can be run at lower pressures but should never be run higher than 6.2 bar (90 psi). If run at a lower pressure the performance of the tool is reduced. For pneumatic power to the tool, an approved 10 mm (3/8 inch) x 8 m (25 feet) maximum length airline is recommended. The tool must be connected to an airline system with an easily accessible air shut off valve. It is strongly recommended that an air filter, regulator, and lubricator (FRL) be used to supply clean, lubricated air at the correct pressure to the tool. An appropriate air pressure regulator must be used at all times while operating this tool when the supply pressure exceeds the marked maximum of the tool, 25,000 RPM. If such equipment is not used, the tool should be manually lubricated. For instructions on connecting the tool to the air supply and manually lubricating the tool, see the Instruction Manual.
If you are on our eBaystore, and are interested in more of our items, we do offer combined shipping! Please understand wecannot see the items in your shopping cart!! To receive a combined shipping invoice, please complete thefollowing steps:Click the buy it now button in each listing & for ALL of theitems you want to purchaseOnce your request is received, we will combineyour order and send you a corrected invoice. AFTER you have received the corrected invoice,you may pay for your order. For shipping outside of the contiguous US, orinternational shipping, please contact us. If you have a question about one of our products, please email us. We check our email regularly, and tryto get questions answered as quickly as possible. If your package arrives damaged or empty, please do not get rid ofthe package and call us right away!
Payments
Feedback
Shipping
Returns
Payments
We accept Paypal, Visa, Mastercard, American Express.
Feedback
Our Seller Ratings
24087
Item as described
25333
Communication
25608
Shipping time
23833
Shipping charges
Our Recent Feedback
cripedistributing
(414078 total)
as described, quick ship
2020-01-28
Got this item fast and they are great! Thank you
2020-01-28
Prompt shipping. Great transaction!
2020-01-28
Shipping
We do combine shipping. Please feel free to contact us if you feel your shipping is high as we are still working on weights.
To request an invoice from me that combines your shipping please use the cart feature in eBay to add items until you are done shopping. Then, hit the request total from seller button. If you do not do it this way eBay will force you to make immediate payments for each item you buy and you will be charged excess postage for each item.
Returns
We ship all of our order's out within one business day.
We are closed weekend's, so any order's placed after business hours or during the weekend will be printed and processed the next business day.
Order's placed on holidays will be processed the next business day.
All item's must be paid for before the seventh day of the committed to date.
Any order's still awaiting payment after this time period may be cancelled or subject to an unpaid item case that eBay open's automatically after a certain amount of time.
Refunding
We gladly accept return's. However, if the return is due to 'buyer remorse' which include's:
It's the wrong size or doesn't fit
I don't need it anymore (Changed Mind)
I found a better price elsewhere
Buyer will be responsible for return shipping and will be subject to a 15% restocking fee. All item's must still be new, unused, and in their original manufacturer packaging (if applies).
We (the seller) will pay return shipping and will refund the buyer in full (or exchange) if:
It's defective or doesn't work
It doesn't match the listing
It's missing parts or accessories
It arrived damaged
Please know, that we do require photo's to be sent for damaged item's, incorrectly sent item's, and item's not as described.
INTERNATIONAL
SHIPPING
24 HR
RESPONSE
open monday-friday
24 HR
Shipping
open monday-friday
Home
View all listings
About
Contact
Terms
Copyright © 2018
Cripe Distributing
. All Rights Reserved.
eBay Templates Design by
OCDesignsOnline