Box of 45 Sinkits Slot-Klips - Hard Surface Undermount Sink Clips Part # 0911SL

Description

Box of 45
- Sinkits Brand Slot-Klips
Granite / Concrete / Solid Surface Undermount Sink Clips
Part # 0911SL
New factory case lot of 45 clips as described below. See pictures for more details !
Shipping is FREE
by seller's choice of ground carrier based on your location in the lower 48 states and quantity purchased.
Sinkits Slot Clips bring the same patented piece of mind as Sinkits Sink Clips, except they insert into a slot cut with a grinder vs a hole drilled into the stone. They also provide a way to quickly, strongly, and safely attach undermount sinks to granite, quartz, concrete or any other hard surface material.
Sinkits Slot-Klips Installation Instructions
Determine the number of Sinkits Slot-Klips required. Mark the locations to be drilled approximately 1” from sink rim. Using an appropriate blade, cut a slot to a depth of ½”.
​
Bend tab away from Slot-Klip body (this will preload the clamp to enable it to stay inserted until tightened), insert clamp fully into the slot, making sure anchor post bottoms out in the hole or clamp body rest against sink rim. Tighten clamp against sink rim. Do not over tighten.
Important: Binding tab must be bent far enough to create pressure when inserting clamp.