-40%
DSX-USB Door Access Control USB Interface 04686 - New
$ 66
- Description
- Size Guide
Description
The DSX-USB Communications Interface is a simple yetrugged USB converter. This port powered device
connects to any 2.0 USB Port through the supplied
cable. The module provides an RS-232 output including
DTR and a simultaneous RS-485 4 wire output.
This module is protocol independent and can be used for
a variety of applications and software not just DSX. The
DSX-USB is built DSX tough with a rugged housing and
the over-voltage surge protection you expect in a DSX
product. Complete with removable terminal block and
status LEDs, this USB Comm Interface has a DSX Edge.
Single Channel USB to RS-232 or RS-485 for Master or
Sub communications. This new module can provide the
RS-232 required for a 1040 Series Master Controller or
Dial-up Modem at the Comm Server. The RS-232 port
has an optional DTR terminal for modem use. The RS485 output can be used for a 1020 Series Master
Controller and all DSX Sub Communications used with
PC Master.
The DSX-USB can be used in conjunction with a DSXMCI to perform a short haul providing a 4 wire RS-485
connection that can be used with 2 twisted pair cable up
to 4000’.