Hot Foam Cutter Foam Sculpture Hot Cutter (Foam Cutter)

Description

Hot Knife Foam Cutter Foam sculpture hot knife cutter (Foam Cutter)
Product Description
Used for cutting EPS foam ,EPE foam, XPS foam, sponge etc. without chippings. Use together with the groover(G02) and the bendable blade, it can do various shape grooving. Use together with the small groover(G01), can grooving for tube seat. Use together with blade clamp(C06) and bendable blade, can used for foam sculpture.
Specification:
Voltage: 120V±10% Frequency:50/60Hz
Power: 200W
Speed: Adjustable
blade:6-8 seconds heating up 500°C
Length of the Wire: 3M
Dimension: 24 x 4.5 x 3.5cm
Packing Size: 28 x 23 x 8.5cm
Gross Weight: 1.1kg
This tool kit complete with one 200W Hot Knife
This tool kit complete with one 200W Hot Knife
It can used todether with different type blades,and it can be used for cuting different materials
This tool kit complete with one 200W Hot Knife
The hot knife cutter used in groover can be model FC100,FC150,FC200,FC250.
It depends on grooving area, if the grooving area is samll, it can use small power hot knife cutter, if it is large, it can use large power hot knife cutter.
200W,120V,Heats up in just about 10 secondsLong life span and can non-stop run;No rough burr after cutting; Durable and Practical.
Accessories:
One pcs 15cm blade
One pcs allen key
One pcs copperbrush
One pcs plastic tool box
One pcs groover
On/Off
Product Details
Temperature Control
This tool kit complete with one 200W Hot Knife
one pcs 15cm Blade and one pcs Groover and one pcs 30cm Bendable Blade The styrofoam groover is combined by hot knife cutter,groover and 30mm bendable blade, used for grooving of EPS foam,EPE foam, XPS foam and sponge.The hot knife cutter used in groover can be model FC100,FC150,FC200,FC250. It depends on grooving area, if the grooving area is samll, it can use small power hot knife cutter, if it is large, it can use large power hot knife cutter.
120V,200W,Heats up in just about 10 secondsLong life span and can non-stop run;No rough burr after cutting; Durable and Practical.
It can used together with different type blades,and it can be used for cuting different materials
Notices:Intermittent operating for the tool, suggest that loosen the switch for a second after 30 seconds’ working (otherwise it may cause overheat of the power tube)