Inkbird Digital Thermostat Temp humdity controller ITC-608 AC 1800W Time Brew US

Description

Inkbird Temperature and Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat with 12 Period Time Stage, 1800w, ETL listed
Description:
ITC-608T is an ETL certificated Temperature and humidity controller with 12 different time stage temperature periods Or only control humidity with plug humidity sensor. which is a good choice for home brewing, fermenting, Greenhouse, terrarium, reptile, planting, meat storage and cooking.
Bullet point:
1.
US ETL Certificate Listed
：ETL listed, rigorously tested for quality control and safety.
2.Warranty ：
The unit itself has 2 years warranty. sensor have 1 year warranty
.
3.Three in one Multifunction Temperature and Humidity Control Mode with
Dual Relay Output
. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller.
4.
Supporting calibration, compressor delay and saving reset setting values
: Compressor delay for device protection and save original setting values in case accidentally power-off.
5.More power up to
1800W. Max Loading: 120V 15A 1800W.
Temperature senor is
waterproof
while humidity sensor is not.
6.Multifunction usage: Can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking.
Notes:
Make it work as a temperature controller ,a humidity controller or a temp & humidity controller
depends on the sensor you choose.
- First, only plug temperature sensor with cooling and heating equipment.
- Second, only plug humidity sensor with humidifier and dehumidifier equipment.
- Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment.
Main features:
*
Plug and play design, easy to use
, can control temperature and humidity at the same time
*Dual relay output, be able to connect with refrigeration and heating equipment at the same time; be able to connect with humidifier and dehumidifier equipment at the same time; be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time
* Support
reading with Centigrade or Fahrenheit unit
* Maximum output load:
1800W (120V, 15A)
* Dual display window, be able to display measured temperature/humidity and set temperature/humidity at the same time
* Supporting Temperature and humidity
calibration
*
Compressor delay protection
for refrigeration control
* High and low temperature/humidity
alarms
are available
* Over-temperature/humidity and sensor fault alarm
* Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change. Same as humidity control
*
Support setting 12 different temperatures in 12 different time period
* Easy to set, PV and SV dual display windows.
Specification:
- Maximum output load：
120Vac, 60Hz, 15A, 1800W
- Temperature display accuracy：0.1℃/℉(<100℃/℉)
- Temperature control range is
-40-212°F(-40-100℃),
humidity display range is
5 -99.0%RH
.
- Relative humidity measurement range：5~99%RH
- Humidity display accuracy：0.1%RH
- Display unit：temperature：Celsius °C or Fahrenheit °F；humidity：%RH
- Ambient temperature：-20℃~60℃/-4℉~140℉
- Storage environment：temperature：0℃~60℃/32℉~140℉；humidity：20~80%RH(Unfrozen or condensation state )
- Temperature sensor cable Length:
2m（78.74in）
- Humidity sensor cable Length:
2m（78.74in)
- Input Power Cable Length: 1.5m（59.05in）
- Unit Dimension: 20.8cm*8.5cm*3.5cm（8.19*3.35*1.38in）
- Warranty:
2 year
Package Content:
ITC-608T Temperature controller Package :
1x ITC-608T controller;
1x Temperature sensor
1x Manual
ITC-608T Humidity controller Package :
1x ITC-608T controller;
1x humidity sensor
1x Manual
ITC-608T Temp.&
Temp. controller Package :
1x ITC-608T controller;
2x Temperature sensor
1x Manual
ITC-608T Temp.&
humidity controller Package :
1x ITC-608T controller;
1x Temperature sensor
1x humidity sensor
1x Manual
Humidity sensor Package :
1x humidity sensor
Temperature sensor Package :
1x temperature sensor