Moonshine Still Keg 2" Copper Column Thermometer DIY Kit Distilling Alcohol

Description

Fast and Free shipping from Michigan
Thermometer forward facing or up, your choice.
You solder it together how you want
. This listing is for all the pieces unsoldered to save money if you want to do it yourself. We have a similar listing of a soldered one if you don't want to solder it yourself. See our other listings.
Perfect for the top of your 2" copper column. This will fit right over 2 inch copper pipe and the out is 1/2" copper to adapt to your thumper or condenser. (FITS OVER 2-1/8" OD PIPE which is standard 2" copper pipe)
• Large high quality Dial thermometer
included
. (thermometer may vary from pictures)
• Thermometer connection 1/2" NPT Lead Free brass thermowell with set screw
• Thermometer can be calibrated
Thermometer attaches by simply screwing in and is easily removed for cleaning. (a few wraps of Teflon tape is necessary to create a seal with npt.
We also sell these soldered for a bit more so you don't have to sweat it yourself. See our other listings.
Stainless steel tri clamp, stainless or copper ferrules and gasket are sold separately and pictured here as an example only, not included. If you are looking for a complete kit see our other listings.
Silicone tubing and compression fittings sold separately by us also.
If purchase a tri clamp ferrule also you can clamp it directly to the opening of a Sanke beer keg, milk can, or to the top of your column if you have a tri clamp end on your column.
We also sell several lengths of columns.
All you need to do to have a complete still is to attach the 1/2" out to your thumper or condenser by silicone tubing, solder, flare, compression, npt thread, or whatever you choose.
Please don't hesitate to ask if you have any questions.
Keg and milk can not included. They are pictured as examples only.