-40%
Rock Wall DIY BLUE Plastic Hand Hold Hold Foot Hold Child Kid Upper Body Kit
$ 31.67
- Description
- Size Guide
Description
Rock grips come in a set of 12. Chunky plastic blow molded Rocks are molded from polyethylene with UV and cold weather protection. There are two different sizes of mounting holes. Unlike most other ebay listings, our Rock Climbing gripsINCLUDE
the attaching screws and bolts. Now smaller sized with the bolt holes that are 3/8" and 2" center to center.
Installation:
You will need all twelve 1 ½” long 3/8” lag bolts and twelve 1 ½” #12 Wood Screws for each set of rocks. Determine difficulty and height wanted. For one set of rocks, use 1” plywood, for taller set, use thicker plywood. Plan configuration wanted for rocks. Place rock on board and mark with pencil where holes need to be drilled. Drill a pilot hole for 3/8” lag bolt for large hole and #12 for small hole for each rock. Then using a 9/16” socket, screw 3/8” lag bolt into rock. Do not tighten until second bolt is installed. Using a 5/16” socket, screw in the #12 wood screw. Tighten both screws. Continue procedure until all twenty-four bolts are screwed in completely. Make sure no sharp point protrudes beyond back of plywood.
Safe Use:
This is for children 5-12 year olds only. Not for Adults. Adults should supervise children at all times. Do not allow children to use unsafely. Do not allow it to be used if damaged.
Approximate Size:
4.5" Length, 3.5" Tall, sticking out from the wall 1.5/2 inches
Maintenance:
Before and after play season and once a month during play season, check that bolts are tight. Make sure there is no cracked plastic, cracks in wood or splinters. Make sure there are not sharp edges or bolts showing through wood. Replace parts as needed. Maintain detailed inspection and maintenance records for public-use playground equipment.
Colors
: Bright Blue